Keeping Thin Titanium Glasses Tight: THINTANIUM 5813 Care

By Gazal Eyecare Shop | Published: 2026-11-05

Category: ヒントとお手入れ

A practical, ordered routine for keeping thin titanium frames snug and stopping slip, using the Lindberg THINTANIUM 5813 as the example.

Quick answer

Start by checking temple length and nose-pad contact before you bend anything. Thin titanium frames stay tight through correct fit and clean contact points, not by squeezing the bridge.

Why thin titanium slips differently from acetate

Titanium is light and springy, so a thin frame can feel secure when new and then gradually drift as the temples relax or the nose pads lose grip. Acetate frames often respond to a simple bend at the temple; thin titanium has less material to work with, so small changes matter more and over-bending is harder to reverse.

That is why the first move is measurement and cleaning, not force. If the frame is already close to your face and the pads are clean, the usual culprit is temple length or a head shape that needs a different size, not a loose screw.

When a custom frame changes the timeline

The THINTANIUM 5813 is part of a customizable line, and Lindberg frames are often made to order. That means a fit issue discovered early is best raised with the shop before the frame settles into daily wear, because replacement parts and size changes follow the same production timeline.

If your frame was ordered with a specific temple length, keep that measurement on hand. It is the single most useful detail when asking for an adjustment or a replacement part later.

Your step-by-step tightness routine

Check temple length against your current fit: Compare the temple length you ordered with how the frame sits now. If the temples stop short of the ear or press too far behind it, the length is the issue, not the hinge. Do not bend the temples to compensate for the wrong length.
Clean the nose pads and temple tips: Wipe pads and tips with a damp microfiber cloth and let them dry fully. Skin oils and sunscreen reduce grip on thin titanium more than on thicker frames. Clean contact points weekly if you wear the frame daily.
Test the frame with a gentle head shake: Put the glasses on and turn your head slowly left and right. If they slide, note whether the movement is at the nose or at the ears before adjusting anything. Locate the slip point first; adjusting the wrong end makes it worse.
Tighten only the hinge screws you can see: Use a proper optical screwdriver and turn until snug, not forced. Stop if the screw will not seat, because a stripped thread needs a replacement part. If a screw keeps loosening, ask the shop to check the hinge rather than adding thread lock.
Book a professional adjustment for pad arms and bridge: Ask the optician to adjust pad arms and bridge alignment with titanium-appropriate tools. Thin titanium can be re-shaped, but repeated home bending weakens it. Bring your temple length measurement to the appointment.

Product note

THINTANIUM 5813: Danish titanium frame handmade in Denmark, with temple length and color as available options. Temple length is a selectable fit variable, so confirm it before assuming the frame itself is loose.
THINTANIUM 5813