Back to Blog
Tips & Care 2026-11-15 Gazal Eyecare Shop 0 views

How to Clean and Care for HYDRA Sunglasses

How to Clean and Care for HYDRA Sunglasses

A practical routine for keeping HYDRA aviators clear and scratch-free, from rinsing off grit to storing titanium and ceramic details safely.

Why the HYDRA Rewards a Deliberate Routine

The HYDRA is an Akoni aviator built from several distinct materials: custom titanium hinges and temples, Japanese acetate temple tips, and ceramic nose pads with beta-titanium arms. Each material responds differently to water, cloth and handling, so a single rough wipe is not the right approach.

The supplied record does not include manufacturer cleaning instructions or care warnings. What follows is a conservative routine based on the materials listed in the catalog, not a set of official steps. When in doubt, use less pressure and fewer products.

HYDRA details that affect how you handle it

  • HYDRA: Hinges: Custom titanium threaded tube screw system Threaded screws can work loose over time; check them periodically rather than overtightening.
    HYDRA
    HYDRA
  • HYDRA: Nose Pads: Ceramic w/beta-titanium arms Ceramic is rigid, so avoid bending the pads or arms to adjust fit.
  • HYDRA: Temple Tips: Japanese acetate with branded titanium and custom screws Acetate can be affected by heat and harsh solvents, so keep cleaning mild.
  • HYDRA: Weight (gr): 37.97 A relatively light frame still deserves two-handed handling to protect the hinge alignment.

A safe cleaning sequence for HYDRA lenses

Work over a clean surface and keep a microfiber cloth nearby. The goal is to lift grit before it is dragged across the lens.

  1. Rinse first: Hold the frame under a gentle stream of lukewarm water to float away dust and salt. Avoid hot water, which can stress acetate temple tips.
  2. Use a mild soap if needed: A drop of pH-neutral hand soap in your fingers is enough for fingerprints and skin oils. Do not use household glass cleaner, alcohol or ammonia-based products on the lenses.
  3. Rinse again: Remove all soap residue with lukewarm water so it does not dry into a film.
  4. Dry with microfiber: Shake off excess water and blot, then wipe gently with a clean microfiber cloth. Avoid paper towels and clothing, which can trap grit.
  5. Clean the frame separately: Wipe the titanium temples and acetate tips with a damp cloth, then dry. Keep water out of the hinge threads as much as possible.

Habits that prevent scratches between cleanings

  • Store in a hard case: The HYDRA's thin black-enamel eye-rim border is a visual feature, not a protective bumper. A rigid case keeps the lenses away from keys and loose objects.
  • Use both hands to remove the frame: Pulling one temple at a time twists the hinge and can loosen the custom titanium screw system.
  • Keep the frame away from heat: Do not leave it on a dashboard or near a heater. Acetate temple tips can soften or distort with sustained heat.
  • Rinse after swimming or sweating: Salt and sweat left on lenses and ceramic nose pads can dull the finish and attract grit.
  • Check screws occasionally: A quick visual check of the hinge and temple-tip screws catches looseness before a temple arm drops out of alignment.

Choosing a colorway with care in mind

The HYDRA comes in Brushed Black-Polarized, Brushed White Gold and Brushed Palladium. The polarized option is the one most likely to show smudges and water spots, so it benefits most from the rinse-and-blot routine above. Lighter metal finishes can show fingerprints on the temples, which a dry microfiber wipe handles well.

The catalog does not specify a lens material or coating, so avoid abrasive polishes and do not assume any particular coating is present.

What to do if a lens or frame is already damaged

If a lens is scratched, the supplied record does not confirm whether replacement lenses are available, so check with the seller before attempting any repair. Do not polish a scratched lens with household abrasives, which can make the damage worse.

For a loose hinge screw, a jeweler's screwdriver used gently is usually safer than forcing the frame. If the acetate temple tip or ceramic nose pad is cracked, stop wearing the frame and seek professional service rather than gluing it yourself.

Related Articles

Customer Service
Home
Products
Cart
Profile